ANNEX I
CATEGORIES OF MACHINERY OR RELATED PRODUCTS TO WHICH ONE OF THE PROCEDURES REFERRED TO IN ARTICLE 25(2) AND (3) SHALL BE APPLIED
PART A
Categories of machinery or related products to which a procedure referred to in Article 25(2) shall be applied:
1. | Removable mechanical transmission devices including their guards. |
2. | Guards for removable mechanical transmission devices. |
3. | Vehicle servicing lifts. |
4. | Portable cartridge-operated fixing and other impact machinery. |
5. | Safety components with fully or partially self-evolving behaviour using machine learning approaches ensuring safety functions. |
6. | Machinery that has embedded systems with fully or partially self-evolving behaviour using machine learning approaches ensuring safety functions that have not been placed independently on the market, in respect only of those systems. |
PART B
Categories of machinery or related products to which one of the procedures referred to in Article 25(3) shall be applied:
1. | Circular saws (single- or multi-blade) for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types: 1.1. sawing machinery with fixed blade(s) during cutting, having a fixed bed or support with manual feed of the workpiece or with a demountable power feed; 1.2. sawing machinery with fixed blade(s) during cutting, having a manually operated reciprocating saw-bench or carriage; 1.3. sawing machinery with fixed blade(s) during cutting, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading; 1.4. sawing machinery with movable blade(s) during cutting, having mechanical movement of the blade, with manual loading and/or unloading. |
2. | Hand-fed surface planing machinery for woodworking. |
3. | Thicknessers for one-side dressing having a built-in mechanical feed device, with manual loading and/or unloading for woodworking. |
4. | Band-saws with manual loading and/or unloading for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types: 4.1. sawing machinery with fixed blade(s) during cutting, having a fixed or reciprocating-movement bed or support for the workpiece; 4.2. sawing machinery with blade(s) assembled on a carriage with reciprocating motion. |
5. | Combined machinery of the types referred to in points 1 to 4 and in point 7 for working with wood and material with similar physical characteristics. |
6. | Hand-fed tenoning machinery with several tool holders for woodworking. |
7. | Hand-fed vertical spindle moulding machinery for working with wood and material with similar physical characteristics. |
8. | Portable chainsaws for woodworking. |
9. | Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s. |
10. | Injection or compression plastics-moulding machinery with manual loading or unloading. |
11. | Injection or compression rubber-moulding machinery with manual loading or unloading. |
12. | Machinery for underground working of the following types: 12.1. locomotives and brake-vans; 12.2. hydraulic-powered roof supports. |
13. | Manually loaded trucks for the collection of household refuse incorporating a compression mechanism. |
14. | Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of more than 3 m. |
15. | Protective devices designed to detect the presence of persons. |
16. | Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11 of this Part. |
17. | Logic units to ensure safety functions. |
18. | Roll-over protective structures (ROPS). |
19. | Falling-object protective structures (FOPS). |