CATEGORIES OF MACHINERY OR RELATED PRODUCTS TO WHICH ONE OF THE PROCEDURES REFERRED TO IN ARTICLE 25(2) AND (3) SHALL BE APPLIED
PART A
Categories of machinery or related products to which a procedure referred to in Article 25(2) shall be applied:
Removable mechanical transmission devices including their guards.
Guards for removable mechanical transmission devices.
Vehicle servicing lifts.
Portable cartridge-operated fixing and other impact machinery.
Safety components with fully or partially self-evolving behaviour using machine learning approaches ensuring safety functions.
Machinery that has embedded systems with fully or partially self-evolving behaviour using machine learning approaches ensuring safety functions that have not been placed independently on the market, in respect only of those systems.
PART B
Categories of machinery or related products to which one of the procedures referred to in Article 25(3) shall be applied:
Circular saws (single- or multi-blade) for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types:
sawing machinery with fixed blade(s) during cutting, having a fixed bed or support with manual feed of the workpiece or with a demountable power feed;
sawing machinery with fixed blade(s) during cutting, having a manually operated reciprocating saw-bench or carriage;
sawing machinery with fixed blade(s) during cutting, having a built-in mechanical feed device for the workpieces, with manual loading and/or unloading;
sawing machinery with movable blade(s) during cutting, having mechanical movement of the blade, with manual loading and/or unloading.
Hand-fed surface planing machinery for woodworking.
Thicknessers for one-side dressing having a built-in mechanical feed device, with manual loading and/or unloading for woodworking.
Band-saws with manual loading and/or unloading for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types:
sawing machinery with fixed blade(s) during cutting, having a fixed or reciprocating-movement bed or support for the workpiece;
sawing machinery with blade(s) assembled on a carriage with reciprocating motion.
Combined machinery of the types referred to in points 1 to 4 and in point 7 for working with wood and material with similar physical characteristics.
Hand-fed tenoning machinery with several tool holders for woodworking.
Hand-fed vertical spindle moulding machinery for working with wood and material with similar physical characteristics.
Portable chainsaws for woodworking.
Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s.
Injection or compression plastics-moulding machinery with manual loading or unloading.
Injection or compression rubber-moulding machinery with manual loading or unloading.
Machinery for underground working of the following types:
locomotives and brake-vans;
hydraulic-powered roof supports.
Manually loaded trucks for the collection of household refuse incorporating a compression mechanism.
Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of more than 3 m.
Protective devices designed to detect the presence of persons.
Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11 of this Part.
Logic units to ensure safety functions.
Roll-over protective structures (ROPS).
Falling-object protective structures (FOPS).